AERO PLASTICS & SUPPLY CO.
CNC MACHINING & FABRICATION
Hydex® 4101 is manufactured from PolyButylene Terephthalate polyester (PBT-P) resin. It is a semi-crystalline thermoplastic. This material is manufactured from Celanex® resin.
GENERAL PROPERTIES
Hydex® 4101 offers excellent mechanical properties combined with good chemical resistance. PBT-P has good impact resistance and toughness, low coefficient of friction & wear, and does not need lubrication. It also is resistant to chemicals, chlorine, water, and steam.
Hydex® 4101 is available in FDA-approved white and non-FDA black colors.
Hydex® 4101L is an internally-lubricated version designed for use in higher wear resistance, PV range and lower coefficient of friction applications.
Both Hydex® 4101 and 4101L are approved for direct food contact (FDA, USDA, and 3A Dairy compliant).
KEY PROPERTIES
• No center line porosity • Superior chemical resistance • Low coefficient of friction • Good impact strength and ductility • Hard and durable surface • FDA, USDA, 3A Dairy approved grades • Replaces brass, aluminum, steel, UHMW, acetal
TYPICAL APPLICATIONS
• Food piston pumps • Valves and valve bodies • Feeder blocks • Timing screws • Gears • Cams • Bushings and bearings • Wear strips • Fuel pump components • Fuel system connectors and rotors
TYPICAL PROPERTIES of HYDEX® 4101 PBT-P |
|||
ASTM or UL test |
Property |
Hydex® 4101 |
Hydex® 4101L |
PHYSICAL |
|||
D792 |
Density (lb/in³) |
0.047 |
0.049 |
D570 |
Water Absorption, 24 hrs (%) |
0.07 |
0.07 |
MECHANICAL |
|||
D638 |
Tensile Strength (psi) |
9,400 |
7,200 |
D638 |
Tensile Modulus (psi) |
425,000 |
380,000 |
D638 |
Tensile Elongation at Break (%) |
50 |
40 |
D790 |
Flexural Strength (psi) |
11,600 |
10,600 |
D790 |
Flexural Modulus (psi) |
420,000 |
390,000 |
D695 |
Compressive Strength (psi) |
11,000 |
11,000 |
D695 |
Compressive Modulus (psi) |
- |
- |
D785 |
Hardness, Rockwell |
R120 |
R110 |
D256 |
IZOD Notched Impact (ft-lb/in) |
0.7 |
0.7 |
THERMAL |
|||
D696 |
Coefficient of Linear Thermal Expansion |
4.5 |
5.0 |
D648 |
Heat Deflection Temp (°F / °C) |
|
|
D3418 |
Melting Temperature (°F / °C) |
420 / 215 |
420 / 215 |
- |
Max Operating Temp (°F / °C) |
221 / 105 |
221 / 105 |
C177 |
Thermal Conductivity |
|
|
UL94 |
Flammability Rating |
HB |
HB |
ELECTRICAL |
|||
D149 |
Dielectric Strength (V/mil) short time, 1/8" thick |
410 |
- |
D150 |
Dielectric Constant at 60 Hz |
3.3 |
- |
D150 |
Dissipation Factor at 60 Hz |
0.002 |
- |
D257 |
Volume Resistivity (ohm-cm)at 50% RH |
4.5 x 1016 |
- |
NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers' complete material property datasheets.
All values at 73°F (23°C) unless otherwise noted.